CCDP (3 PAPERS) – DESIGNING
Implementing Cisco IP Routing (642-902)
Exam Description: The Implementing Cisco IP Routing (ROUTE 642-902) is a qualifying exam for the Cisco Certified Network Professional CCNP®, Cisco Certified Internetwork Professional CCIP®, and Cisco Certified Design Professional CCDP® certifications. The 2hour, 45-55 question exam will certify that the successful candidate has the knowledge and skills necessary to use advanced IP addressing and routing in implementing scalable and secure Cisco ISR routers connected to LANs and WANs. The exam also covers configuration of secure routing solutions to support branch offices and mobile workers. The exam is closed book and no outside reference materials are allowed.
The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.
Implement an EIGRP Based Solution, Given a Network Design and a Set of Requirements
25%
- Determine network resources needed for implementing EIGRP on a network
- Create an EIGRP implementation plan
- Create an EIGRP verification plan
- Configure EIGRP routing
- Verify EIGRP solution was implemented properly using show and debug commands
- Document results of EIGRP implementation and verification
Implement a Multi-Area OSPF Network, Given a Network Design and a Set of Requirements
25%
- Determine network resources needed for implementing OSPF on a network
- Create an OSPF implementation plan
- Create an OSPF verification plan
- Configure OSPF routing
- Verify OSPF solution was implemented properly using show and debug commands
- Document results of OSPF implementation and verification plan
Implement an eBGP Based Solution, Given a Network Design and a Set of Requirements
5%
- Determine network resources needed for implementing eBGP on a network
- Create an eBGP implementation plan
- Create an eBGP verification plan
- Configure eBGP routing
- Verify eBGP solution was implemented properly using show and debug commands
- Document results of eBGP implementation and verification plan
Implement an IPv6 based solution, given a network design and a set of requirements
15%
- Determine network resources needed for implementing IPv6 on a network
- Create an IPv6 implementation plan
- Create an IPv6 verification plan
- Configure IPv6 routing
- Configure IPv6 interoperation with IPv4
- Verify IPv6 solution was implemented properly using show and debug commands
- Document results of IPv6 implementation and verification plan
Implement an IPv4 or IPv6 based redistribution solution, given a network design and a set of requirements
15%
- Create a redistribution implementation plan based upon the results of the redistribution analysis
- Create a redistribution verification plan
- Configure a redistribution solution
- Verify that a redistribution was implemented
- Document results of a redistribution implementation and verification plan
- Identify the differences between implementing an IPv4 and IPv6 redistribution solution
Implement Layer 3 Path Control Solution
10%
- Create a Layer 3 path control implementation plan based upon the results of the redistribution analysis
- Create a Layer 3 path control verification plan
- Configure Layer 3 path control
- Verify that a Layer 3 path control was implemented
- Document results of a Layer 3 path control implementation and verification plan
Implement basic teleworker and branch services
5%
- Describe broadband technologies
- Configure basic broadband connections
- Describe basic VPN technologies
- Configure GRE
- Describe branch access technologies
Implementing Cisco IP Switched Networks (642-813)
Exam Description: The 642-813 exam is a two-hour test with 35−45 questions. Implementing Cisco IP Switched Networks (SWITCH 642-813) is a qualifying exam for the Cisco Certified Network Professional CCNP®, and Cisco Certified Design Professional CCDP® certifications. The SWITCH 642-813 exam will certify that the successful candidate has important knowledge and skills necessary to plan, configure and verify the implementation of complex enterprise switching solutions using Cisco’s Campus Enterprise Architecture. The SWITCH exam also covers secure integration of VLANs, WLANs, voice and video into campus networks. The exam is closed book and no outside reference materials are allowed.
The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.
The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.
Implementing Cisco IP Switched Networks (642-813)
Exam Description: The 642-813 exam is a two-hour test with 35−45 questions. Implementing Cisco IP Switched Networks (SWITCH 642-813) is a qualifying exam for the Cisco Certified Network Professional CCNP®, and Cisco Certified Design Professional CCDP® certifications. The SWITCH 642-813 exam will certify that the successful candidate has important knowledge and skills necessary to plan, configure and verify the implementation of complex enterprise switching solutions using Cisco’s Campus Enterprise Architecture. The SWITCH exam also covers secure integration of VLANs, WLANs, voice and video into campus networks. The exam is closed book and no outside reference materials are allowed.
The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.
The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.
Implement VLAN Based Solution, Given a Network Design and a Set of Requirements
50%
- Determine network resources needed for implementing a VLAN based solution on a network
- Create a VLAN based implementation plan
- Create a VLAN based verification plan
- Configure switch-to-switch connectivity for the VLAN based solution
- Configure loop prevention for the VLAN based solution
- Verify EIGRP solution was implemented properly using show and debug commands
Implement a Security Extension of a Layer 2 Solution, Given a Network Design and a Set of Requirements
12%
- Determine network resources needed for implementing a Security solution
- Create a implementation plan for the Security solution
- Create a verification plan for the Security solution
- Configure port security features
- Configure general switch security features
- Configure private VLANs
- Configure VACL and PACL
- Verify the Security based solution was implemented properly using show and debug commands
- Document results of Security implementation and verification
Implement Switch Based Layer 3 Services, Given a Network Design and a Set of Requirements
14%
- Determine network resources needed for implementing a Switch based Layer 3 solution
- Create an implementation plan for the Switch based Layer 3 solution
- Create a verification plan for the Switch based Layer 3 solution
- Configure routing interfaces
- Configure Layer 3 Security
- Verify the Switch based Layer 3 solution was implemented properly using show and debug commands
- Document results of Switch based Layer 3 implementation and verification
Prepare Infrastructure to Support Advanced Services
5%
- Implement a wireless extension of a Layer 2 solution
- Implement a VoIP support solution
- Implement video support solution
Implement High Availability, Given a Network Design and a Set of Requirements
19%
- Determine network resources needed for implementing High Availability on a network
- Create a High Availability implementation plan
- Create a High Availability verification plan
- Implement first hop redundancy protocols
- Implement switch supervisor redundancy
- Verify High Availability solution was implemented properly using show and debug commands
- Document results of High Availability implementation and verification
Designing Cisco Network Service Architectures (642-874)
Exam Description: The ARCH Designing Cisco Network Service Architectures (ARCH) v1.0 642-874 exam is a 75-minute test with 45−65 questions that are associated with the Cisco CCDP® certification. This exam tests a candidate’s knowledge of the latest developments in network design and technologies, including network infrastructure, intelligent network services, and converged network solutions. The exam is closed book and no outside reference materials are allowed.
The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.
The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.
Design Advanced Enterprise Campus Networks
30%
- Design for high availability in enterprise networks
- Design Layer 2 and Layer 3 campus infrastructures using best practices
- Describe enterprise network virtualization considerations
- Design for infrastructure services
- Voice
- Video
- QoS
- Identify network management capabilities in Cisco IOS Software
Design Advanced IP Addressing and Routing Solutions for Enterprise Networks
24%
- Create summary-able and structured addressing designs
- Describe IPv6 for campus design considerations
- Create stable and scalable routing designs for EIGRP for IPv4
- Describe IPv4 multicast routing
- Create IPv4 multicast services and security designs
- Create stable and scalable routing designs for OSPF for IPv4
- Create stable and scalable routing designs for BGP for IPv4
Design WAN Services for Enterprise Networks
8%
- Describe Layer 1–3 WAN connectivity options
- Optical networking
- MetroEthernet
- VPLS
- MPLS VPNs
- Describe IPsec VPN technology options
- Evaluate WAN service provider design considerations
- Features
- SLAs
- WAN backup
- Create site-to-site VPN designs with appropriate technologies, scaling, and topologies
Design an Enterprise Data Center
32%
- Describe data center network infrastructure best practices
- Describe the components and technologies of a SAN network
- Describe integrated fabric designs using Cisco Nexus technology
- Describe network and server virtualization technologies for the data center
- Create an effective e-commerce design
- Design a high-availability data center network that is modular and flexible
Design Security Services
6%
- Create firewall designs
- Create NAC appliance designs
- Create IPS/IDS designs
- Create remote access VPN designs for the teleworker